Ultimate Pullbox Door Closer
1.【Close door at a constant speed】Close the door at a constant speed. Prevent damage to the door and effectively extend the service life of the door.
2.【Wide Compatibility】Suitable for wider doors [steel wire 1.5 meters]
3.【Multiple installation methods】 Complimentary glue and screws, you can choose any method to install
4.【Door closer installation steps】
Step 1: Wipe the dust from the place where it needs to be pasted, and keep it clean and dry.
Step 2: Tear off the adhesive film of the take-up box and the hook, and stick it to the selected installation position.
Step 3: After installation, hang up the drawstring to open and close the door and try-down, If you are satisfied, you can remove the drawstring, wait for 24 hours, and then hang the drawstring for use.
5.【Door closer installation requirements】
Choose the installation location: Due to the different door styles, the installation location is also different. The installation location should be as low as possible to rub the steel wire rope.
The best installation position. The wire-receiving box is installed on the door frame, and the transparent hook is installed on the door.
The problem of unstable adhesion: rough and uneven surfaces such as cement wall, whitewashed walls, brick wall, paint wall, etc. are not strong. Application: ceramic, metal, marble, ceramic tile, glass, etc.
If the door is not smooth, it will not close firmly or even be pulled.
The door cannot be locked: This door closer is an auxiliary door closing, it can only close the door but not lock the door.
Product name: damping buffer door closer
Shell material: ABS
Wire length: 1.5 meters
Steel wire material: 304 stainless steel
Features: closing the door at a constant speed
Tension: 800g/1200g (optional)
1 door closer
1 adhesive hook
4 installation screw